ECO GH8

Flow:
up to 22 gpm (100 lpm)
Pressure:
up to 100 psig (6.9 bar)
Temperature:
up to 450°F (232°C)
Overview

The Gearchem pumps are designed for continuous on duty use. They are constructed out of the strongest material available to provide superior chemical resistance and assure long life.
Designed to handle a variety of process liquids including liquefied gasses, the GH8 can handle highly viscous fluids to very thin, clear, non-abrasive fluids. Typically employed to transfer fluids they are equally advantageous in metering fluids because of their consistency.

Approximate Shipping Weight
10 lbs (4.5kg) pump only
Min Fluid Temperature
-40°F (-40°C)
Fluid pH Range
0-14
Approximate Weight
10 lbs (4.5kg) pump only
Bearing Type
Internal Sleeve
Solution Description
Transfer or Metering (Dosing)
Turndown Ratio
SEE FLOW CURVES
Casing Housings
316SS, Alloy C, Alloy 20
Packing Arrangements
Standard or lantern ring
Max Speed
1725 rpm
Theoretical Displacement
1.368 gal/100 rev (51.79 cc/rev)
Drive Shaft Diameter
0.75″
Min System Pressure
.1mm Hg (abs)
Max Allowable Working Pressure
200 psig
Motors
1725 RPM, 60 Hz (1450 RPM, 50 Hz)
Motor Power
3 but is influenced by operating differential pressure and fluid viscosity
Motor Frame
Bare shaft Pump, Long-couple to any motor
Seat O-Rings Available
PTFE, PFA-Encsulated 316 SS Spiral Winding, Others on request
Drive Idler Gears & Gear Type
316 SS, Alloy C, Alloy 20, PEEK, Teflon
Shafts
316SS, Alloy C, Alloy 20
HP Required
3 but is influenced by operating differential pressure and fluid viscosity
Pump Controls Links
Mechanical Seals
Single internal or double seals, Single external seal to 50 psi.
Bearings
Carbon 72, Carbon 92, Glass-filled PTFE
Port Size and Type
1” NPT or BSPT, 1.0” 150# ANSI Flange
Bearing Lubrication
Process fluid
Max Differential Pressure
100 psi (6.89 bar)
Wearplate
PEEK, Glass-filled PTFE, Carbon, Ceramic
Product Options
  • Bearing flush
  • Center Housing Vent
  • PFA Encapsulated 316SS Spiral Winding o-ring
  • Metallic Bearing Lock Pins
  • Slotted Carbon Bearings
  • Slotted Carbon Wear Plates
  • Housing vent port
  • Bolt-on Heating/cooling jackets

Features

  • Gearchem pumps offer laminar flows for consistent, continuous and measurable transfer or metering of liquids.
  • Bi-directional
  • Closed running and operating clearance evacuate air from the suction piping
  • Can handle clear lubricating and non-lubricating fluids including hydrocarbons and polymers
  • Variety of gears available and easily convertible to satisfy different service conditions
  • All gear materials are non-sparking for use with hazardous fluids
  • Internal sleeve type bearings are lubricated by process fluid eliminating the need for periodic lubrication maintenance and prevents contamination of external lubrication materials
  • Three types of seals and two packing arrangements available
  • Simplified maintenance due to quick disassembly
  • Possibility of contamination of pumped fluid is eliminated
  • Handles a variety of fluids and viscosities
  • Superior chemical resistance