Eclipse Model 25

up to 7.4 gpm (28 lpm)
up to 150 psi (10 bar)
up to 200°F (93°C)with deration

The Eclipse represents a dramatic advance in pump technology. Combining proven design principles with patented features, our pumps are safe, simple, and reliable. Structurally rugged with corrosion-resistant materials, Eclipse is an ideal fit for many corrosive liquids. From acids to bases, we cover the entire pH scale.

The innovative technology behind Eclipse supports its ability to handle the most corrosive chemicals with a simple-to-service, front pull-out design. Eclipse is available with wetted components in completely non-metallic construction. This ensures corrosion resistance over a wide range of chemicals and process conditions. These pumps are magnetically driven to eliminate mechanical seal wear and leaks associated with rotating seals. The patented bearing design promotes constant lubrication.

Approximate Shipping Weight
26.0 lbs. (11.8 kg.) less motor
Min Fluid Temperature
-40°F (-40°C)
Fluid pH Range
Approximate Weight
26.0 lbs. (11.8 kg.) less motor
Bearing Type
Sleeve bearing, integral wear plate
Neodymium Encapsulated Virgin ETFE
Solution Description
Transfer or Metering (Dosing)
Casing Housings
Max Speed
1750 rpm
Theoretical Displacement
0.479 US gal/100 rev. (18.1 cc/rev.)
Drive Shaft Diameter
Min System Pressure
.1mm Hg (abs)
Max Allowable Working Pressure
up to 200 psig (14 bar)
1750 RPM, 60 Hz (1450 RPM, 50 Hz)
Motor Power
2 but is influenced by operating differential pressure and fluid viscosity
Motor Frame
NEMA: 56C, 143/145TC – 182/4CIEC: 90 to 112 B14 Face
Seat O-Rings Available
Drive Idler Gears & Gear Type
Carbon Reinforced PTFE
Alumina Ceramic
HP Required
2 but is influenced by operating differential pressure and fluid viscosity
Agency Controls
Carbon Graphite or Graphite-Impregnated Silicon-Carbide
Port Size and Type
1 inch ANSI 150#/ DIN 20/25 Flanged
Bearing Lubrication
Process fluid
Max Differential Pressure
150 psig (10 bar)
Product Options
  • Bearing flush
Back Pressure Valves
KOP Kits
Pressure Gauges
  • All wetted components are completely non-metallic, not lined
  • Pump housings and gears are made of engineered composites, magnetically driven, and require no mechanical seals
  • Zero leakage, no emissions of hazardous or regulated chemicals
  • Fewer parts and material options means simplified ordering and inventory
  • Front pull-out design – makes for easy service and maintenance in place
  • Pre-defined KOPkits® allow for easy ordering and kitting of all necessary parts to bring the pump back to factory performance
  • Engineered composite fluoropolymer provide superior chemical resistance, lighter weight, shorter lead-times
  • Pump is bidirectional-can be operated in either direction
  • Modular design allows for the pump ports to be mounted in 45° increments (to a full 360°, vertical, horizontal, or any configuration imaginable)