Pulsation Series T7

Flow:

12 – 48 gpd (1.9 – 7.6 lph) 0.50 – 2 gph

Pressure:

100 psi (7 bar)

Overview

The Pulsation Series T7 was designed to feed chemical products on a timed schedule. Typical applications include the feed of biocides in open-air cooling towers. The feed cycle is initiated and controlled by the programmable timer. The Series T7 provides everything you need in one unique, compact package to create a simple and cost effective metering system for timed applications. A 7-day programmable timer controls the Series T7. The timer is programmable in 1-minute increments with up to 8 on/off cycles per day. Each timed event can be set to run any day of the week on a 7-day cycle. Other control features include a standby mode, continuous ‘ON’ mode and the ability to adjust the stroke length from 0 to 100%. Four distinct models are available, having pressure capabilities to 100 psi (7.0 bar) @ 12 gpd (1.9 lph), and flow capabilities to 48 gpd (7.6 lph) @ 50 psi (3.3 bar), with a turndown ratio of 10:1. Metering performance is reproducible to within ± 3% of maximum capacity.

Over 25 years of excellence, PULSAtron pumps carry agency approvals of ETL, ETL Sanitation, CE and NSF 61 (PVDF material and Degassing Head models).

General Specifications

Pump Head Materials GFPPL, PVC, PVDF, 316 SS
Fitting Material Available GFPPL, PVC, PVDF
Bleed Valve Same as fitting and check valve selected (except 316SS)
Turndown Ratio 10:1
Seat O-Rings Available PTFE, CSPE, Viton
Balls Available Ceramic, PTFE, 316 SS, Alloy C
Diaphragms PTFE-faced CSPE-backed
Tubing Available Clear PVC, White PE, PVDF
Power Input 115 VAC – 50/60 HZ -1 ph, 230 VAC – 50/60 HZ
Peak Input Power 300 Watts, Average Input Power at Max SPM: 130 Watts
Average Current Draw 115 VAC: Amps – 1.0, 230 VAC: Amps – 0.5
Accessories Dampeners

Gauges

KOP Kits

Pre-Engineered Systems

Process Controllers

Tanks

Features

  • Complete timer control in one unique package
  • Solid state 7 day electronic timer
  • Isolated from earth ground
  • Few moving parts and wall mountable
  • Safe and easy priming with durable leak-free bleed valve assembly (standard)

BROCHURES

PULSAtron Series Brochure

TECH SHEETS

PULSAtron Series T7 Tech Sheet

IOMS

PULSAtron Series T7 IOM

OTHER DOCUMENTS

PULSAtron QR Codes

PULSAtron Parts ID

Metering Pumps Product List

PULSAtron Quick Reference Guide

Video

PULSAtron – Installation

PULSAtron – How To Prime A Pump

PULSAtron – How to change the KOPkit

 

Related products

Interesting products